AmigaOS 3.2 CDRom Software Last version of the Amiga operating system...
IDE4 Zorro 2 board for Amiga 2000 :IDE controller for Amiga 2000, 2 x...
RGB / Scart cable for Atari ST / STF / STFM : For conneting any Atari...
ScanPlus AGA for Amiga 1200 / 4000D :For connecting on a flat VGA...
Rys MKII USB / DB9 Adapter For connecting most of USB mouse (USB or...
Amiga 500 / Amiga 1000 Classic 520 accelerator card :Provided with One...
ATX power supply adapter for Amiga 500 / 600 / 1200 : For connecting an...
Capacitors Kit for Amiga 600 (All revision) /1200 rev rev 1A/1B/1Dx/2B...
Last version of the Amiga operating system for: Amiga One 500 / Sam 460...
External DB19-ACSI adapter with data cable for Atari ST / STE : For...
Suppliers
No supplier
Sum UB keyboard adapter for A600 : For connecting an USB keyboard on any Amiga 600, Must be plugged on the motherboard keyboard controller chip directly, Includes a one USB port bracket, Firmware can be upgraded with a PC
Kit HxC Slim SD Card reader and its dedicated plexiglass support :Kit which includes one HxC Slim SD Card reader, his dedicated plexiglass support for Amiga 500 / 600 / 1200 and Atari ST(e-f), the screws kit and the mounting manual.N.B. : this kit has been specifically developped by Amedia Computer in order original Amiga cases have not to be cut !
8MB FastRam Memory Extension for Amiga 1200 : Adds 8MB of Fast to the Amiga 1200 2 Clockports Header: 1 for Real Time Clock Module (option available separately). 1 Second to give computer more expandability.N.B. : PCMCIA compatibility by Jumper or Shell program (4MB or 5.5MB**).
2.5/3.5 inch IDE Right Angle Adapter for Amiga 1200 - Amiga 600 : Allows the horizontal connection of an IDE adapter (especially SD one) above the Amiga 1200 and Amiga 600 motherboards, Includes 2 x 2.5 inch female IDE connectors and one 3.5 inch male IDE connector N.B. : the metal cover shield must be removed for using these adapters ! Option : - SD /...
INTernal Compact Flash on IDE44 CF2IDE adapter :For using a Compact flash on the 44 pins IDE port of the Amiga 600 / 1200 motherboards.
DF0 Selector adapter : Allows you to use an external floppy disk drive / HxC / Gotek (DF1) as the internal floppy disk drive (DF0)Options : - External Gotek DF1 adapter : HERE, - External floppy disk drive adapter for using an internal floppy disk drive on the external floppy disk drive port : HERE, - Internal floppy disk drives for the above adapter :...
1x IDE 2.5 / Compact Flash / 1 x IDE 3.5 Adapter :For using a compact flash memory card and a 3.5 inch IDE device in any Amiga 1200 / 600.
UltraSata Acrylic cased external box for Atari ST(e) / TT:2 x SD card slots, HDD emulation, Powered with MicroUSB cable (not included), Connexion on the external ACSI port of 16 bits Atari, ACSI - DB19 cable sold separatly, TOS 1.4 minimum required. N.B. : Do not forget adding one ACSI - DB19 cable in your cart for connecting the product to your Atari...
Pack CF 4GB / IDE adaptater / Workbench 3.1 : Complete pack which includes one Compact Flash / IDE adapter (one IDE cable is oncluded), one 4GB Compact Flash memory card and the Workbench 3.1 installed with an electronic licence, all i ready to run when the package is received ! 1Mo ChipRAM and 4Mo FastRAM required.Special price :only 35,90 euros instead...
Nichicon 105°/85° (electrolytic) and (CMS) Capacitors batch for Amiga 2000 rev 6.2N.B. : take good care of the desired capacitors kit according to your motherboard revision !Amedia Computer can not be responsible for a mistake in the choosen kit !
A602 1MB Chip memory for Amiga 600 :Adds 1MB to the Chip memory of Amiga 600, Battery slot, Clock port, Connection in the trap doorN.B. : not compatible with Indivision ECS boards
Amiga 600 / Amiga 1200 IDE 2.5 / Compact Flash Adapter : Allow you to use a compact flash memory card as an harddrive on the internal IDE connector, 5cm cable included N.B. : the compact flash memory card is not included ! You can add a 8GB memory card HERE